It’s important to make sure your files are set-up properly for printing. Once you submit your file, we are not responsible for any issues with your file, any spelling errors, design issues, file resolution issues, color issues, or any other errors that could be wrong with your design file. If you’re not sure about your file, send your artwork
FILE TYPES ACCEPTED:
We recommend saving as a .PDF. You may also send the file in the following types: jpg, jpeg, tif, tiff, eps, and png. We prefer that you send .PDF with embedded or outlined fonts. .PDF’s are easier to handle and will likely speed up your turn-around. Remember to flatten your files before uploading.
Bleed must extend past the cut-line and will be trimmed from the product during the final cutting phase. When the image is required to extend all the way to the edge, bleed is needed to preserve the finished look and the quality of the final product. Please keep all text at least 0.125″ inside the cut-line. The bleed for Standard Products is 0.125″.
We only accept 300 dpi files and no less.
If you send us an RGB file, there is a chance that a color shift may occur and you may not be satisfied with your job. You should always start and finish your designs in CMYK color mode.